You will know you have a S&G Lock if your safe has this keypad:

s_g

Note, there are two sets of instructions listed below; one is for changing the Administrator Code and the other for changing the User Codes.

    • Administrator Code: it is required when changing or adding additional user codes.
    • User Code: used for people with additional access to your safe. You have up to 8 user codes.

Programming Instructions for Administrator

    • Enter the existing six (6) digit code (for new safes, preset code is 1,2,3,4,5,6), turn handle counter-clockwise and pull door open. With the door pulled open, put the safe in the locked position by turning the handle clockwise. You should be able to see the protruding bolts on the safe door.If there is one (1) long beep after entering the code, the lock did not recognize the code, slow down.

ca23-h4fdb-13-empty_127x170_

    • Press “7” then “4”, then “*”.

capture

    • Enter your current 6 digit code then press”#”. You will hear three beeps.

capture2

    • Press “1” then “*”.

capture3

    • Select and enter a new six (6) digit code. You will hear three beeps.

capture4

    • Re-enter a new six (6) digit code. You will hear three beeps.

      If you hear a long beep, the old code is still valid.

capture4

    • With the safe door open, test the new combination.If you have any issues call us at 800-242-1055 EXT 771

Congratulations! You have changed you Administrator Code. Now don’t forget it because you will need it if you want to change the User Codes!

Programming Instructions for Users

    • Enter the existing six (6) digit code (for new safes, preset code is 1,2,3,4,5,6), turn handle counter-clockwise and pull door open. With the door pulled open, put the safe in the locked position by turning the handle clockwise. You should be able to see the protruding bolts on the safe door.If there is one (1) long beep after entering the code, the lock did not recognize the code, slow down.

ca23-h4fdb-13-empty_127x170_

    • Press “7” then “4”, then “*”.

capture

    • Enter the Admin Code then press”#”. You will hear three beeps.

capture7

    • Press the user number you are trying to change/add (2-9) then “*”.

capture6

    • Select and enter a new six (6) digit code. You will hear three beeps.

capture4

    • Re-enter a new six (6) digit code. You will hear three beeps.If you hear a long beep, the old code is still valid.

capture4

  • With the safe door open, test the new combination.If you have any issues call us at 800-242-1055 EXT 771